-
Level Transmitter, KROHNE, BW25
The Krohne BW 25 Liquid Level Indicator operates on the displacement principle. The length of the displacement rod corresponds to the measuring range. A displacement body suspended on a measuring spring is immersed in the liquid and is subjected to an upthrust based on Archimedes’ principle, this being proportional to the mass of the liquid displaced. Every change in the weight of the rod corresponds to a certain change in the length of the spring, and is therefore an indication of the liquid level. Extension of the spring is transmitted by magnetic coupling from the measuring zone to an indicator. This transmission method permits pressure-tight separation of the measuring spring system and the scale.
BW 25
- Displacer level transmitter for heavy-duty level and interface applications Continuous measurement of level, liquid-liquid interface or density at extreme process conditions Measuring range: 0.3…5/ 1…18 ft
- Density: ≥45 kg/l/ ≥28.1 lb/ft3
- -40…+400°C/ +752°F;
- -1…400 barg / -14.5…10000 psig
- Datasheet
برای قیمت تماس بگیریدLevel Transmitter, KROHNE, BW25
برای قیمت تماس بگیرید -
Magtech™ Magnetic Level Indicator
The Magtech Magnetic Level Indicator is a low-maintenance alternative to sight glasses and other level indicators. It provides non-invasive level indication while reducing leak points and fugitive emissions. The indicator gives you an easy to see level indication that is visible up to 100 ft (30 m) away. It is ideal for your high-temperature, high-pressure and corrosive applications were you want visual indication of both level and interface. Combined with Emerson’s externally mounted level transmitters and switches the Magtech Magnetic Level Indicator provides you with a complete, redundant and cost-effective level solution.
- Specifications
- Viscosity
- Up to 2000 cP
- Operating Pressure
- Up to 4000 psi (275.9 bar)
- Operating Pressure
- Measurement Range
- Features
- Minimal leak points as compared to sight glasses
- No process liquid in contact with indicator glass
- Designed for both gas/liquid and liquid/liquid interface measurements
- Measure both interface and top level with one indicator
- Datasheet
برای قیمت تماس بگیریدMagtech™ Magnetic Level Indicator
برای قیمت تماس بگیرید -
Radar measurement Time-of-Flight Micropilot FMR52
For applications in aggressive liquids Micropilot FMR52 offers extraordinary advantages with its completely PTFE-filled and flush-mounted horn antenna. The FMR52 is also the sensor for hygiene-sensitive applications in the food and life sciences industry – ASME BPE, USP Class VI, 3-A and EHEDG approvals. Micropilot is used for continuous, non-contact level measurement of liquids, pastes and slurries. The measurement is not affected by changing media, temperature changes, gas blankets or vapors.
- Hardware and software developed according to IEC 61508 up to SIL3 (in homogeneous redundancy)
- Reliable non-contact measurement even for changing product and process conditions
- HistoROM data management concept for fast and easy commissioning, maintenance and diagnostics
- Highest reliability even in the presence of obstructions in the vessel due to new Multi-Echo Tracking evaluation
- Heartbeat Technology for a cost-effective and safe plant operation during the entire life cycle
- Seamless integration into control or asset management systems and intuitive, menu-guided operation concept (on-site or via the control system)
- World’s easiest proof test concept for SIL and WHG saves time and cost
- Datasheet
برای قیمت تماس بگیریدRadar measurement Time-of-Flight Micropilot FMR52
برای قیمت تماس بگیرید -
Compact ultrasonic level transmitter, LST300
LST300 represents the future of level measurement. While using intelligent compact transmitters has always been attractive, certain limitations prevented their use in many applications. LST300 removes those old obstacles. Whether you have the risk of flooding or corrosive materials in the process, LST300 survive these conditions easily. With metal at the top and PVDF at the bottom, LST300 is the first compact ultrasonic to be resistant to corrosion on the entire instrument. Ingress protection approvals up to IP68 (optional) ensure the entire device can survive flooding.LST300 combines the most advanced functions found on any ultrasonic in any class, in a compact form. Installation becomes easy thanks to the graphic echo display and advanced diagnostics. The false echo filtering algorithm combined with the best‑in‑class beam angle ensures easy installation in narrow areas with many obstructions. With through the glass technology, you never have to open the cover to configure the instrument. It is hard to believe that all this functionality is available on a device powered by only two‑wire loop power.FEATURES:
- Maintenance free, non-contact continuous level sensor
- 2-wire instrument with HART digital communication
- Up to 10 m measurement range
- Wide temperature range of -40 to 85 ˚C
- Accuracy of ±2 mm or 0.2 % of full span (the larger one)
- Beam angle as low as 5˚ with false echo filtering for narrow spaces
- Easy installation with graphic echo display, advanced diagnostic and easy setup menu
- Unique GAP technology ensures the best performance under any condition
- IP66/67 and NEMA 4X (can submerge to 1 m depth for 30 minutes)
- ATEX, IEC & FM Intrinsic safe and non-sparking approved
- Datasheet
برای قیمت تماس بگیریدCompact ultrasonic level transmitter, LST300
برای قیمت تماس بگیرید -
Guided Level-Radar, Levelflex FMP51
Levelflex FMP51 for level measurement even under extreme process conditions like high temperature and high pressure in the process industry. FMP51 offers maximum reliability even in case of moved surface and foam or when numerous tank baffles interfere with the measurement. Levelflex FMP51 is used for continuous level measurement of liquids, pastes and slurries but also for interface measurement. The measurement is not affected by changing media, temperature changes, gas blankets or vapors.
- Reliable measurement even for changing product and process conditions
- HistoROM data management concept for fast and easy commissioning, maintenance and diagnostics
- Highest reliability due to new Multi-Echo Tracking evaluation
- Hardware and software developed according to IEC 61508 up to SIL3
- Heartbeat Technology for a cost-effective and safe plant operation during the entire life cycle
- Seamless integration into control or asset management systems and intuitive, menu-guided operation concept (on-site or via the control system)
- World’s easiest proof test for SIL and WHG saves time and costs
- Datasheet
برای قیمت تماس بگیریدGuided Level-Radar, Levelflex FMP51
برای قیمت تماس بگیرید -
R-SERIES REFLEX LEVEL GAUGE, RBB.28.NY.A.LL
OROBICHE Reflex indicators display the fluid level through a transparent surface being part of a column that is connected to the vessel by on-off cock gauges. The measuring part is composed of one or more elements from prismatic borosilicate glass (crystal) which trigger the reflection or non-reflection of the environmental light depending on whether the inner surface comes or does not come into contact with the fluid or with the gas (vapour). The crystal is tightened to the inside of a steel box by means of bolts.
Its sturdy construction and its good visibility, without using dedicated illuminators, make it ideal for use in heavy-duty applications with pressure up to 400 bars and temperature of the media from -196 °C up to +427 °C. APPLICATIONS AND TECHNICAL DATA Tube level indicators are used in various industrial processes, especially in the chemical, petrochemical, power production, metal and steel, water treatment, food, paper industries and the like. They are typically preferred to transparency indicators in application on clear and non-corrosive fluids. Versions with body and wetted parts in galvanized Carbon Steel are available, whereas AISI 316, ASTM LF2, Hastelloy and other materials are available upon request.
OPTIONS
- Safety ball check in AISI 316 (in the event of the crystal getting broken, it avoids fluid losses)
- Graduated scale
- Uninterrupted visibility
- Drain and vent valves
- Top / Bottom connections
- No-Frost device
- Electric or steam tracer
- Aluminosilicate glasses
- Screws and cock levers in AISI 316, for off-shore use
- Datasheet
برای قیمت تماس بگیریدR-SERIES REFLEX LEVEL GAUGE, RBB.28.NY.A.LL
برای قیمت تماس بگیرید -
PRESSURE REDUCING REGULATOR (FLANGED), 2405
The Type 2405 self-operated pressure reducing regulator is used to control the pressure of flammable gases used as a source of energy, e.g. in boilers, driers, vaporizers, heat exchangers or industrial furnaces. Alternatively, it can control the compressed air supply in process engineering applications.
An additional application of the regulator is the pressure control of inert gas used for inerting or blanketing reaction or storage tanks to protect the product in the tank from oxidation, explosion or escaping. To achieve an economical consumption of the inert gas, its pressure must be controlled to always remain slightly higher than atmospheric pressure while the tank is being filled or emptied. A pressure reducing valve is used for controlling the downstream pressure (p2) to an adjusted set point. The design of a pressure reducing regulator valve is to close when the downstream pressure rises above a set value. These valves are self-operated in that the downstream pressure being controlled is tapped downstream of the valve and transmitted via a control line to the operating diaphragm of the Type 2405 where it is converted into a positioning force.
برای قیمت تماس بگیریدPRESSURE REDUCING REGULATOR (FLANGED), 2405
برای قیمت تماس بگیرید -
Differential Pressure Transmitter, EJA110A
The EJA-A series is Yokogawa’s most successful pressure transmitter line. First released in 1991, it continues to offer high performance and high reliability for any application. With an installed base of over 4-1/2 million EJA-A transmitters worldwide, it has a proven track record that makes it a true industry workhorse.
The EJA110A is the Traditional-mount Differential Pressure Transmitters in the series.
EJA110A features include:
- 0.065% Accuracy
- 0.1% Stability per 5 years
- 2,300 psi MWP
- Datasheet
برای قیمت تماس بگیریدDifferential Pressure Transmitter, EJA110A
برای قیمت تماس بگیرید -
Rosemount™ 3051 Differential Pressure Flow Transmitter
The Rosemount 3051 Differential Pressure (DP) Flow Transmitter is an industry-leading flow measurement solution that features optimal accuracy. This transmitter can be pre-assembled to various primary elements, leak-tested and calibrated for cost-effective commissioning and quick installation while reducing leak points and increasing process control and accuracy. This DP flow transmitter is also engineered with power advisory diagnostics, which detect electrical loop integrity issues to reduce downtime.
- Available pre-assembled to primary elements for an installation-ready flow solution that ensures optimal performance
- Complete flow assemblies are leak-tested and calibrated to reduce leak points up to 70% and simplify installation
- 10-year installed stability and 150:1 rangedown produce reliable measurements and wide application flexibility
- Local operator interface offers easy-to-use menus and built-in configuration buttons for streamlined commissioning
- Power Advisory diagnostics detect electrical loop integrity issues for reduced downtime
- SIL 2/3 certified to IEC 61508 (via 3rd party) and prior-use certificate of FMEDA data for safety installations
- Datasheet
برای قیمت تماس بگیریدRosemount™ 3051 Differential Pressure Flow Transmitter
برای قیمت تماس بگیرید -
Daniel SeniorSonic 3414 Four-Path Gas Ultrasonic Flow Meter
Preferred worldwide for fiscal measurement, the next-generation Daniel™ SeniorSonic™ 3414 Four-Path Ultrasonic Flow Meter retains the field-proven, British Gas-chordal design while significantly increasing sampling speed with ultra-fast Daniel 3410 Series Electronics. This powerful, high-performance meter minimizes measurement uncertainty by enabling rapid detection of changing flow dynamics such as blockages upstream of the meter, abnormal flow profiles and liquid hydrocarbons. MeterLink™ Software displays a wealth of predictive diagnostics generated by the meter, providing expert flow analysis, flow disturbance alerts and suggested corrective actions, to expedite detection before measurement is impacted.
Features
- Increase I/O with new Type 4 CPU Module with up to six frequency or digital outputs
- Speed issue resolution with 3D view of the flow profile that indicates swirl, crossflow, asymmetry and turbulence
- Get an intuitive view of meter health and extend calibration cycles to minimize costs and downtime
- Reduce manual errors with automatic calculations of AGA 8 Compressibility and AGA 10 Speed of Sound
- Virtually eliminate incremental pressure drop and reduce energy costs with a full-bore design
- Improve operational efficiency with bi-directional flow measurement and increased flow capacity
- Enhance performance in harsh conditions with rugged Daniel T-20 Series Transducers
- Field-replaceable transformer module simplifies maintenance and maximizes uptime
- Increase I/O with new Type 4 CPU Module with up to six frequency or digital outputs
- Datasheet
برای قیمت تماس بگیریدDaniel SeniorSonic 3414 Four-Path Gas Ultrasonic Flow Meter
برای قیمت تماس بگیرید -
Rosemount™ 3051S C: Differential/ Absolute/ Gauge Pressure Transmitter
Rosemount 3051S C Pressure Transmitters are the industry standard for differential, flow, level and pressure measurement. The coplanar platform enables seamless integration with manifolds, flow and level solutions.
Features & Benefits
- HART compatible for easy configuration and calibration (alos FIELD BUS system is available)
- Available Diaphragm materials: S.S, Hast-alloy, Gold, Monel Alloy
- Local display option for easy field measurements (and non-LCD models)
- Easily adapts to most Instrument manifolds (available upon request)
- Best-in-class performance with 0.04% accuracy
- Industry’s first %-of-reading flow transmitter delivering a 10x performance improvement
- Industry’s first 10-year stability under actual process conditions
- Super Module design platform enables more cost-effective installation and maintenance practices
- Scalable functionality to meet your expanding needs
- Safety Certified to IEC 61508
- Datasheet
- Brochure
- Ordering information
برای قیمت تماس بگیریدRosemount™ 3051S C: Differential/ Absolute/ Gauge Pressure Transmitter
برای قیمت تماس بگیرید -
Rosemount™ 3051S T: Gage and Absolute Pressure Transmitter
Rosemount 3051ST In-Line Pressure Transmitters are the industry standard for gauge and absolute pressure measurement. The in-line, compact design allows the transmitter to be connected directly to a process for quick, easy and cost effective installation.
Features & Benefits
- HART compatible for easy configuration and calibration
- Comes standard with 316 stainless steel wetted materials for durability in most process applications
- Local display option for easy field measurements
- Calibrated spans from 0.3 to 10000 psi
- Total performance of ±0.15%
- Installed five-year stability of 0.125%
- Unmatched Dynamic Performance
- Optional PlantWeb Functionality to increase plant productivity
- Responds up to eight times faster than the typical pressure transmitter
- Datasheet
- Ordering Code
برای قیمت تماس بگیریدRosemount™ 3051S T: Gage and Absolute Pressure Transmitter
برای قیمت تماس بگیرید
کالای نفت، خرید ابزار دقیق به قیمت و ساده